Skip to content

Tiki-Inspired · Tattoo stencil design

Tiki-Inspired Sun Medallion

An abstract face within a sun medallion with radial rays.

An abstract face within a sun medallion with radial rays.

Design notes

The ring of rays gives the composition its circular silhouette.

What to check on a paper proof

Use the outer ray tips to measure the full diameter. On a smaller proof, examine the gaps between neighboring rays and the break between the face and its surrounding ring. Compare the face at the same size with fewer interior lines if it becomes hard to read.

Artwork source

AI-generated artwork created for Tattoo Stencil and displayed here as a design reference.

Motif background

The circular face and broad rays form a contemporary medallion. The face treatment echoes the decorative figures that the Smithsonian documents on American tiki serving ware. The rays belong to this illustration and give it a more circular outline than the other faces in the collection.

Smithsonian collection of American tiki glasses

Placement to compare

Place a cutout over a shoulder mockup with the rays at their full diameter. Look at the shape from the front and at an angle. If the tips wrap out of view, try a smaller disk and check the face again.

Linework and shading to discuss with your artist

Discuss treating the circle, cheek marks, and rays as three visual weights. Compare a firm liner outline with lighter marks around the face, and ask which ray shapes should stay open if the artist uses solid shading elsewhere.

Needle grouping terminology from Cheyenne

A medallion that extends equally in every direction

The Sun Medallion uses broad rays to turn a compact face into a circular composition. The outer tips set the footprint, while the ring gives the face its own space. The Mask and Palm Face both stack their features vertically. This reference suits a round opening in a paper layout, such as the center of a shoulder mockup, where you want to see a similar amount of empty area on either side. If the opening is markedly taller than it is wide, compare the Mask before compressing the circle into an oval.

The downturned mouth, arched eyes, and cheek shapes carry the expression inside the ring. A version with fewer short marks in the cheeks still needs enough of the face to hold its own against the broad rays. Cover some of those interior marks on a duplicate drawing to decide whether the center feels clearer or simply emptier. Beside another circular motif, let the ray tips set the spacing between the two pieces. Measuring only from the inner ring would make the outer tips appear much closer than the layout suggests.

Compare the shape at the size you plan to use

Draw a center mark and two crossing axes on a paper circle large enough to include the ray tips. Set the medallion over those axes and move it on a shoulder mockup without tilting the eyes. View the widest pair of rays from the front and at an angle. If the tips on one side wrap out of the chosen view, test a smaller circle before squeezing the disk into a narrower shape. The upright expression can serve as a check while you move the entire cutout.

A comparison checklist for Tiki-Inspired Sun Medallion

  • Measure across the ray tips and mark the center of the face on the paper mockup.
  • Compare the gap between two adjacent rays against the gap between the face and the surrounding ring.
  • Mark the top of the face in the round outline. This keeps the expression upright as you move the circular mockup.

Make two temporary paper windows, one that shows the face and one that reveals only a run of rays at the outside. Compare those views in the full drawing and in a draft with one small cheek accent removed. When you uncover the whole design, the stronger version still reads as a face centered in a disk. Check the gap beside the mouth again if the face seems off center. A tiny dark mark can shift where you look first.

Decide which details belong in the linework

Treat the face and the ring of rays as separate layers of contrast. In the center, the opening under the nose separates it from the mouth. At the edge, the ring keeps the ray bases from becoming part of the face. If a smaller version feels crowded, test removing one short cheek mark while leaving the complete ring and the outline of the mouth. Keeping those contours makes it possible to judge whether the new version lost a detail or actually changed the expression.

Look at the balance between the eyes, mouth, and larger border before evaluating the short geometric marks. Keep the spacing around the face consistent in a simplified study. Compare a separate copy with fewer internal divisions if the face loses its expression on the smaller proof.

Check a plain-paper print at actual size

Use a sized print to check one ray at the top and one near each side of the disk. If two neighboring rays look joined, compare the dark edge there with the other side before widening every gap. Then cover the rays briefly and look only at the mouth and nose. If the inner opening has closed as well, the print may be too small for both types of separation. Compare a larger round proof before altering the ray spacing or thinning the face.

On a proof that fits one sheet, measure the disk across two perpendicular axes and check that the farthest ray tips are inside the margins. A clipped ray can make an accurately scaled circle look uneven. If you need to assemble sheets, use the outer ring and two rays that appear in the overlap as alignment marks. Once the pages meet, follow the curve through the join and check for a kink before judging whether any ray spacing needs to change. See the actual-size printing guide for calibration and page alignment.

Keep a record of the direction and the chosen draft

Draw a top mark above the eyes on the proof and record the diameter including the rays. A circular cutout can rotate on a placement drawing without making the change obvious, so keep the mark visible when reviewing a version with fewer facial accents. Label that alternate with the specific cheek mark you omitted rather than calling it a smaller sun. Send a full-disk image with the notes so the center, ring, and expression are available in the same view.